Sheet Vinyl Flooring DisposalLike most big home improvements, sheet vinyl flooring removal is serious business. Not because it requires a host of specialized tools or skills. But, because it’s just difficult. It’s very work intensive and takes a whole lot of time and effort to get it done. And, also like a number of renovations, you’ll need to plan in advance for what to do with the remodeling debris.
One of the most frustrating home remodeling tasks is trying to remove an old sheet vinyl or vinyl floor. Even when the sheet vinyl is pulled off, things only get worse. Now you’re faced with gobs of old glue that seem harder than meteorites all over the floor. —Improve Net.comThis is due to the fact that sheet vinyl flooring can contain hazardous materials, like asbestos. For older homes, this is more likely and that means you can’t just toss it out on the curb or even put it in a dumpster you rent. It’s best to have a junk removal service come and pick it up, instead. This way, you won’t have to deal with the hauling or disposal.
Monrovia Sheet Vinyl Flooring Removal GuideSheet vinyl is a great flooring choice because it’s low-cost and very durable. Plus, it comes in a wide variety of styles. So, it makes for the perfect solution for many spaces. But, it’s susceptible to damage from sharp objects and even pets. So, here’s how to go about sheet vinyl flooring removal:
- Test it for asbestos. It’s of utmost importance to first confirm it’s safe to proceed. Which means you need to test for asbestos to ensure that it’s safe to take up on your own or it requires a professional service.
- Carefully remove the vinyl sheeting. Start with a corner and attempt to pull up the linoleum from that corner over to the opposing side. If it’s glued down, you won’t be able to pull it off the subfloor. So, use a floor scraper to remove the linoleum.
- Remove the adhesive. Next, you’ll need to remove any leftover adhesive residue from the subfloor. You can use a solvent for this, along with a floor scraper to get it all.
- Dry and clean the subfloor to finish. After the adhesive is gone, you can then use a shop-vac or wet-dry vac to clean up any remaining debris. Once the adhesive is completely gone, you can then deep clean the subfloor to install a new floor covering.