Vinyl Fence DisposalA total dismantling of a vinyl fence can be done over a weekend or two and will require a few tools. The biggest help will be in manpower. The more people you have to help you tackle a vinyl fence take down, the faster it will go. Be sure to schedule a junk hauling and removal service to come out to pickup and haul off the fence. If you find the project is too cumbersome, a junk hauling service will also be able to tackle this odd job.
Whether you’re replacing or removing your vinyl fence or you just need it out of your way temporarily, you will need to know how to take it apart. Many vinyl fences use a system of notches and routes (a simple insert system) for assembly, and others have screws and brackets you will need to deal with. Disassembling is a simple process that you can do yourself. —SourceWhen you’re ready to dismantle your vinyl fence, you’ll need a few tools, which include: chisel, hammer, driver-driver, shovel, as well as leather gloves and eye protection. It’s best to start at one end and work your way to the other, but, depending on how many helpers you have, you can work from both ends and meet in the middle.
Mendota Vinyl Fence Removal and Disposal GuideNow, let’s get onto how to do vinyl fence removal. As mentioned, you’ll need at least one set of helping hands. Along with the help, a few common household tools. Here’s how to go about vinyl fence removal:
- Remove the gate first. This is a great place to start because it provides easy access to the posts, away from walls and other obstructions. Examine how the gate is attached, then carefully remove the hinges from the post and pull the gate away.
- Remove the caps from the end posts. Using a hammer and chisel, tap the edge of the chisel up under the cap on the end post and hammer it upward until the cap is loose. Once loosened, pull the cap off.
- Pull off the panels from the posts. Next, you’ll need to remove the individual panels, one at a time. As with the gate, pile these out-of-the-way so they aren’t a tripping hazard. If possible, stand them up so critters can’t hide or nest underneath.
- Dig up the fence posts, one-by-one. Lastly, you’ll have to remove the posts one at a time, using a post hole digger. This is the most laborious part of taking down any fence. Generally, posts are buried about two to three feet into the ground, set into concrete.