About Remodeling Debris DisposalPlanning is the best part of any home improvement project. It’s critical to layout the scenario from start to finish so you know precisely where you stand all through the process. Of course, this means having a plan of action for remodeling debris disposal. Make no mistake, the mess will pile up quickly and get out of control fast. This is why you need to schedule junk removal in advance so you can stay on track.
You can easily remove a countertop yourself if you are replacing it or renovating your kitchen. Although this does require some elbow grease and a little sweat and time, it is definitely within the skill range of the average DIYer. Of course, when removing your countertop, you will want to have a new one on hand to replace it so you don’t have to be without working space very long. —Do It Yourself.comWhen you take up the kitchen countertop, you’ll discover all sorts of surprises. These can easily include pleasant memories and a whole lot of nasty. You just might discover an abandoned pest colony or encounter other unpleasantries. Regardless, you’ll need a way to deal with the debris, which is where junk hauling comes into play. The point is to be prepared for each phase of the project.
Kitchen Countertop Replacement in EnglewoodKitchen countertop replacement isn’t that difficult. Although, you need to proceed with caution. This is especially true if you’re going to keep the same cabinet base and/or walls. It’s also a good idea to have a set of helping hands to make it easier. Here’s how to start the kitchen countertop replacement process:
- Pull up the sink. Turn off the water supply and place a pan under the sink with a towel underneath. Then, disconnect the water and drain lines. Next, pull the sink out and set it aside.
- Remove the backsplash. Usually, a backsplash is glued to the wall. So, use a chisel and pry bar to pull the backsplash off the wall. (If you want to reuse part or most of it, proceed with care.)
- Pry the countertop off the base. Next, you’ll need to determine how the countertop is attached to the base. Typically, it’s fastened with nails or screws. Start in an outside corner and pry the laminate countertop off the base.
- Unfasten any nails or screws. Once the countertop is off the base, remove any remaining, protruding nails or screws from the base. Now, you can install a new countertop or disassemble the base and replace the entire fixture.