
Kitchen Cabinet Disposal Options
Where you’ve got to start is actually at the end of the process. While that sounds strange, it’s actually one of the most common remodeling mistakes. Think about it this way. You’re ready to renovate your kitchen, so you go in and clear it out. Then, you begin to remove the cabinets and teardown the backsplash. Before you know it, there’s a huge pile of remodeling debris. Now, what to do with it?A kitchen island stands away from the normal counter space. It provides an extra work surface as well as storage. If you need to move the island during a kitchen remodel, you may run into some issues. If yours contains a cooktop or sink, you may need to bring in a professional to move the gas, electrical or plumbing lines. —Do It Yourself.comThis is often the point many homeowners find themselves because they did not think ahead. They are so focused on the finished product, it doesn’t even occur to them they need remodeling debris disposal until it’s unavoidable. And, that’ puts them in a real pickle. So, do yourself a favor and be proactive.
Kitchen Cabinet Removal Guide Santa Rosa Residents can Use
Gather together a couple of drill-drivers, pry bars, wrenches, and hammers. Then, enlist the help of a friend or family member. Once you’re ready to begin, follow these steps to remove your kitchen cabinets:- Clear the area. Begin by clearing the whole area and putting up plastic and laying down drop cloths. You need to try to contain as much dirt and dust as possible to that room alone. Be sure to empty the cabinets and not leave anything inside.
- Take the doors off the cabinets. Remove the doors by unfastening the hinges but do not remove the door pull or handle yet to make them easier to carry.
- Take off the hardware. Now, remove any other hardware from the cabinets (if applicable), along with the shelves. Put the hardware and shelves aside, also so they aren’t a tripping hazard.
- Pull the cabinet shells down. With the doors, hardware, and shelves out of the way, you can then remove the cabinet shells. You might have to unfasten retaining screws and/or pry them out of place.