Glue-down carpet disposal. Ugh. Yes, it’s a really big job. But, not because it requires specialized skills. It’s difficult because indoor-outdoor carpet removal is tough work. In fact, it’s one of the most difficult home improvement projects anyone can take on, no matter their handyman chops. This is due to the fact that it’s very labor intensive and more about time and effort than nuance. So, if you need to do glue-down carpet disposal, be prepared to put in some serious labor.
Glue-Down Carpet Disposal in Tampa
Okay, so there are two big sets of challenges in front of you. The first is the actual removal. The second is what to do with it once it’s up. For the most part, you can just call a local junk removal company to haul it away. When they come by, take the opportunity to offload and purge whatever else you no longer want, need, or don’t use. You can really lighten the load and free up a good amount of space and kill two birds with one stone.Removing outdoor carpet is no easy task – often it is glued down to cement and makes the task much more difficult than removing indoor carpeting. As carpeting outdoors can make or break the environment and mood of the space, replacing an old worn out carpet though a difficult task can be rewarding by remaking the space into an enjoyable one. —Do It YourselfAlso, you’ll have one additional challenge. And, that’s not damaging the subfloor underneath. If it’s concrete, this might not be a problem. But, even if it is, or another material, there’s a chance you can damage it. So, proceed with caution to avoid causing yourself additional work, time, and expense.
Commercial Carpet Removal Guide
To remove glue-down carpet, you’ll have to do it step-by-step. Unfortunately, there are no workable shortcuts. So, here’s how to do glue-down carpet removal right. Start by emptying the room completely. Leave no furniture or decor behind. Then, do the following to remove glue-down carpet:- Cut the carpet into sections. Cut into the carpet with a utility knife, scoring it from one end of the room to the other. Then, go across the room, creating four separate sections. Cut again in both directions until there’s four different sections.
- Scrape from the corners inward. Next, insert a floor scraper under the carpet in a corner and work under it to the other sides. (It might be possible to pull up entire sections once initially loosened.)
- Remove the adhesive from the subfloor. Use a glue dissolution solvent to remove the adhesive from the floor; following the manufacturer’s instructions to get the best results.
