Indoor-Outdoor Carpet Disposal OptionsPerhaps the biggest challenge in with indoor-outdoor carpet removal isn’t taking it up off the floor. It’s actually how to dispose of it. You see, you can’t just roll it out to the curb because the local trash collection agency probably won’t pick it up.
Removing indoor-outdoor carpet is no easy task – often it is glued down to cement and makes the task much more difficult than removing indoor carpeting. As carpeting outdoors can make or break the environment and mood of the space, replacing an old worn out carpet though a difficult task can be rewarding by remaking the space into an enjoyable one. —Do It Yourself.comSo, you have to dispose of it in another way. Do yourself a favor and call in a local junk removal service to dispose of it for you. This way, you don’t have to deal with having to recycle it or take it to another drop-off location. Plus, you can take the opportunity to unload a bunch of other unwanted stuff at the same time.
DIY Indoor-Outdoor Carpet Removal Vacaville Residents can UseNow, let’s get to how to remove indoor-outdoor carpet DIY style. More than likely, it’s installed with glue. Which means it’s literally stuck directly to the subfloor. Here’s a general overview for how to go about a DIY indoor-outdoor carpet removal:
- Clear out the space. Your first order of business is to remove any furniture and decor from the room. Empty it out completely so there are no obstacles and to avoid damage.
- Cut the carpet into sections. Cut into the carpet with a utility knife, scoring it from one end of the room to the other. Then, go across the room, creating four separate sections. Cut again in both directions until there’s four different sections.
- Pull up the cut-up carpet sections one-by-one. Once you have the sections cut, you can start to pull one after the other, taking caution not to damage the walls. And, practice good posture to avoid hurting your back. Roll each section up as you free it and put it out of the room.
- Remove the adhesive from the subfloor. Use a glue dissolution solvent to remove the adhesive from the floor; following the manufacturer’s instructions to get the best results.