Above Ground Pool Disposal in Englewood

Above ground pool disposal. Words that can easily strike fear into anyone. That’s because it’s a huge undertaking. And, one that will require a ton of elbow grease. This, not to mention what to do with the discarded materials. In other words, this is a lot of hard work. So, read on to learn more about above ground pool disposal and what you need to know.

Common Dismantling Reasons

If an above ground pool structure fails, there’s a possibility you’ll have to also deal with a flooded basement. But, it might not come to that. However, it’s important to know the condition of your above ground pool for the sake of safety, at the very least. Furthermore, you should also continually monitor the amenity to know when it’s time to take it down.

There are several reasons for taking an above ground pool down, but regardless of why you are doing it, the concern is how to do it. When you take the pool apart, it is important to do it in the proper order so that nothing, including yourself is at risk. If you have the original boxes that all of the parts came in, it is a big help in the dismantling process, but by no means is it essential. --Hunker

The reason for this is because it will create a huge mess. And, that’s a scenario you definitely want to avoid, if possible. After all, you don’t need another big clean up job. Plus, you need to protect your lawn and landscaping. While there are several reasons to take down an above ground pool, only a few are unavoidable.

Above Ground Pool Disposal in Englewood

As for the above ground pool removal, you’ll begin with an obvious task — draining the pool. Of course, it won’t fully drain, but should easily be enough to work with. Here’s the next steps for going about an above ground pool disposal you can follow:

• Remove the fastening caps. Typically along the top are fastening caps, which hold the liner in-place. Remove these, one-by-one and put them aside. It's best to do this from outside the pool, if you can to avoid damaging the liner if you are going to re-install the pool at a later date.
• Take the liner out of the pool. Next, you'll take the liner out of the pool. Here again, proceed with caution if you're going to reuse it. Work in a circle to fold it up and then put it off to the side.
• Take down each individual wall. Now, you can remove each separate wall from the frame. Generally, there are two metals involved — aluminum and steel. You should separate these if you're going to scrap the whole thing or if you plan to put the pool up again.
• Revive the lawn underneath, if desired. To finish the job, you can treat the area underneath where the pool stood with grass seed and fertilizer. This way, it won't leave an ugly mark in the lawn.

When you need an above ground pool dismantle and disposal job done in Englewood, just phone 800-737-5923 or visit Pro Junk Dispatch.